MIRKA 412, Руководство пользователя, Страница: 10 / 124

10
english
Mirka 412 / 415 / 415 M
7.2.3 Emptying dirt tank 1. Remove the upper section of
cleaner from the dirt tank.
2. Using one hand, take hold of
the dirt tank underneath and
tip out the dirt.
3. Dispose of the dirt in accord-
ance with legal regulations.
4. Clean the rim of the tank be-
fore fitting the upper section
of cleaner.
Before reinserting the suction
hose:
5. Clean the inlet fitting and hose
collar.
Only after picking up harmless dust
without a filter bag.
7.2.4 Replacing filter element 1. Open the retaining clamps
and remove the upper sec-
tion of the cleaner from the
dirt tank. Lay the upper sec-
tion of the cleaner down with
the filter element facing up-
wards.
2. Turn the filter holder anti-
clockwise (1) and remove it
(2).
3. Mirka 415 M: Place the pro-
tective filter bag over the filter
element (3).
4. Carefully remove the filter el-
ement and close the protec-
tive filter bag with a knot.
5. Clean the filter seal (4).
Check it for damage and re-
place it if necessary.
6. Check the antistatic clamp
(5) for damage and have it
replaced by the Service if
necessary.
7. Fit a new filter element.
8. Check that the float (6) works
properly. When the filter hold-
er is turned, the float inside
must move about easily.
9. Fit the filter holder and turn it
clockwise to secure it firmly.
10.Dispose of the used filter ele-
ment in accordance with le-
gal regulations.
Never use the vacuum cleaner
without a filter.
Mirka 415 M: During the following
work, ensure that dust is not unnec-
essarily spread around. Wear a P2
breathing mask.
3
6
1
2
1
2
5
4