Mircom TAS-2000 Series, Руководство пользователя

Страница: 6 / 36

Introduction
2
Keypad Navigation
The diagram below shows how to use the keypad when in programming mode. It applies to both
Scrolling and Non-Scrolling Directory keypads.
Entering Programming Mode
To make changes to either scrolling or non-scrolling directories, you must first enter programming
mode.
Note:
If you are programming a function and do not enter information for three minutes,
the display will return to the programming menu without saving your changes. If
you are in the programming menu for 3 minutes, the display will return to the main
screen.
Note:
Before programming the system, make sure you have filled out the Resident
Directory Worksheet on page 29.
Entering Programming mode
1. Press .
2. Enter the password.
• If you have not set a personal password,
press
(ten-digit factory default).
• If you have set a personal password, enter your 10-
digit password.
You are now in programming mode.
3
5
4
7
9
0
8
Press to enter a
record when in edit
mode or to delete a
record when in
delete mode
In the programming
menu , press to
scroll up.
In programming mode ,
press to exit
without saving ( does not
apply to edit or delete
modes
).
In the programming
menu, press to
scroll down.
In programming mode,
press to save your
changes and continue
(
does not apply to
delete mode ).
Press to exit the
edit or delete mode
9
Press to select an item in
the programming menu
0
Enter the Password
[_ _ _ _ _ _ _ _ _ _]
9 9 9 9