background image

TAS-2000 NSL System User’s Guide

1

Introduction

About this Manual

This user’s guide provides information on the most common programming features of the 
TAS-2000 NSL Scrolling and Non-Scrolling Directories. It is broken down into two sets of 
instructions: 

Part 1 Non-Scrolling Directory Programming 

 and 

Part 2 Scrolling Directory 

Programming

. With these instructions, you will be able to:

• Add, delete, and edit records

• Set the Main and Aux doors’ DTMF

• Set the online and door timers

• Change your password

To determine which type of directory you have, see 

Determining the Type of TAS-2000 Directory 

You Have

, below.

Refer to the 

Glossary

 page 25 for an explanation of commonly used terms in this manual.

Determining the Type of TAS-2000 Directory You Have

Before you begin programming your TAS-2000 directory, you must first determine which type of 
directory you have.

Non-Scrolling Directory

A non-scrolling directory lists the resident records on a paper template to the left of the display 
screen. The easiest way to determine if you have a non-scrolling directory is to look at the screen 
on your TAS-2000 when it is in normal mode.

The display should look like this: 

If your screen looks like the one pictured above, then you have a non-scrolling directory.

Scrolling Directory

A scrolling directory lists the resident records electronically on the screen. The easiest way to 
determine if you have a scrolling directory is to look at the screen on your TAS-2000 when it is in 
normal mode.

If your LCD display shows four lines, you will see the following message: 

If your LCD display shows only two lines, you will see the same message, but it will scroll on two 
lines from right to left. Either way, if you see the above message on your display, then you have a 
scrolling directory.

Technical Support

For all technical support inquiries, please contact Mircom’s Technical Support Department between 
8 A.M. and 5 P.M. (EST) Monday through Friday, excluding holidays.

Email:

 [email protected]

Local Phone:

 905-695-3535

Toll-Free Phone:

 1-888-449-3535

Local Fax:

 905-660-4113

Toll-Free Fax:

 1-888-660-4113

 <<Mircom>>

Enter the dial code

 <<Mircom>>

Press  ‘*’  or  ‘#’ key  

to  scroll  up  or

down

Содержание TAS-2000 Series





































Отзывы: