TAS-2000 NSL System User’s Guide
19
Editing Records
To edit a record, you must be in
Programming Mode
. Refer to
Entering Programming Mode
on
page 2 for instructions.
Step 1: Enter Edit Record mode
1.
Press
(scroll up) or
(scroll down).
2.
Press
when the arrow is pointed beside “Edit
Record”. The display enters Edit Record mode.
Step 2: Select Record
1.
Press
(scroll up) or
(scroll down) to find the
record you want to change.
2.
Press
to enter the record.
Step 3: Enter resident’s name
• If you want to change the resident’s name, enter it
now. (
see page 16
for instructions)
. The name may
be up to 15 characters long. Press
to save and
continue.
• If you do not want to change the resident’s name,
press
to continue.
Step 4: Enter Dial Code
• If you want to change the dial code, enter a code
that is between 1 to 4 digits long. Press
to save
and continue.
• If you do not want to change the dial code,
press
to continue.
Step 5: Enter Relay Code
1.
Enter the relay code.
2.
Press
to save and continue.
Step 6: Enter NSL-ID
1.
Enter the NSL-ID.
2.
Press
to save and continue.
Add New Record
>Edit Record
0
1000 >John Doe
1001 Sam Spade
Enter Name
[ _ _ _ _ _ _ _ _ _ ]
Enter Dial Code
[ _ _ _ _ ]
Enter Relay Code
[ _ _ _ _ ]
Enter NSL-ID
[ _ _ ]
Содержание TAS-2000 Series
