![background image](http://html1.mh-extra.com/html/mircom/fx-3318/fx-3318_installation-and-operation-manual_1805768042.webp)
36
Operation
5.10.3 Reports
Overview
Reports can be generated in command mode from the reports menu. Reports can be
displayed in a special format on the shared display for the following items:
1. Alarm log
The alarm log report displays the contents of the alarm event log on the shared display which
contains the last 400 of any of the following events:
•
Activation of any alarm input or common control which activates the common alarm
sequence.
•
Activation of system reset.
•
Clearing of the event log (as the first entry).
Each entry contains the time and date of the event and a description of what the event was, for
example:
For input circuits the first line shows the programmed message, the second line shows the
status of the circuit and the position of the event in the queue along with the total number of
events in the queue.
Pressing the
INFO
key gives the following additional information.
The first line shows the loop# and the address, the second line shows the date and time when
the event has occurred.
Other events are displayed in the same format with information applicable to that event only.
2. Event logs
The general event log report displays the contents of the general event log on the shared
display which contains the last 400 of any of the following events:
•
Activations of any input circuits.
•
Restoral of non-latching input circuits.
•
Pre-alarm on any device.
•
Initiation of the alarm verification sequence on a verified alarm input.
•
Any system troubles.
•
Activation of any system common control or any command on the command menu.
The report format is similar to the alarm log report. Pressing the
INFO
key shows additional
information about the log.
Report Menu
1. Alarm Log
2. Event Log
3. Current levels
4. Verif Counts
5. Maint Report
6. A/P Report
Nverf alm ipt
Active 002/016
Lp:1 Addr:002
Jul 20, 2005 09 :25AM