LT- 1155 Rev. 0
Nov. 2012
Page
3
of 4
Mounting the Chassis into the BBX-1024XT(R)
Install the chassis into the BBX-1024XT(R) enclosure as shown below in Figure 4. Use four (4) 8-32 nuts to connect the
Chassis to the BBX-1024. Connect all green ground wires to the dimple in backbox and secure them using a #8 screw.
Ensure that this ground connection leads to an earth ground. Connect the battery cables to the batteries. Refer to LT-600
Section 6.7 Power Supply Connections for more information.
Figure 4: Mounting of MCC-1024-12XTDS into BBX-1024XT(R)
