Miranda PresStation, Руководство пользователя

Страница: 57 / 145

PresStation User Manual Choosing and Changing your Source
Miranda Technologies Ltd Page 57
Always Show Source
In manual operation you can only select sources of the current displayed
group but under automation or router RCP control it is possible to select a
source outside of the displayed group. In this situation the illuminated soured
buttons will be turned off as they no longer represent active sources.
To monitor out of range sources use the Always Show Source mode which
can be selected from the panel configuration screen. In this mode, when a
source is selected that is outside of the displayed group either button 1 or 10
(default) is reallocated to that source.
Example:
With group 1 sources displayed and Always Show Source enabled, when the
preset bus changes to source 16 (group 2) PresStation will assign source 16 to
button 10 (default) which now represents the out-of-range preset. The button
will light up and the text displayed for that source will change to that of
source 16. The entire 10th column has become source 16 temporarily. If you
press the 10th button on the PGM bus you are actually cutting to source 16
not source 10. The same is true for the AUX bus.
The 10th button will stay as source 16 for as long as the preset remains on it
and
Always Show Source remains enabled. If the preset source moves back to
within the displayed group, for example source 4, button 4 will light up and
the 10th bus will go back to being source 10. If the preset changes to source
17,
Always Show Source will still be active and the 10th light will stay lit but
the text source will change to display source 17.