Controlling a MVP
PresStation User Manual
Page 118
Miranda Technologies Ltd
Device type must be set to “mvp” and device protocol to “evertz”. The
debug and timeout values are optional, and will default to the values shown
below if not entered into the configuration file.
For each shotbox channel that is setup for the
Presmaster
Control panel an
entry should be put into the configuration file containing the Evertz NCP and
PTX IP addresses and the port number for the PTX. An additional entry
nochan can be added to define which layout is displayed when no channel is
acquired on the panel.
panel
{
// panel section defining shot names
}
port0
{
device_type="mvp"
device_protocol="evertz"
debug=0
timeout=1
shot_chan0
{
NCP="172.29.144.131"
PTX="172.29.114.115"
PTX_Port=1
}
shot_chan1
{
NCP="172.29.144.131"
PTX="172.29.114.115"
PTX_Port=2
Содержание PresStation
