Miranda NV9602, Руководство пользователя, Страница: 45 / 68

NV9602 Control Panel • User’s Guide 35
5. Operation
Operating Concepts
3 Optionally press a source button. The source currently routed to that destination might already
be what you want. Pressing the source performs a take.
4 Select the levels you want to lock or unlock. Selected levels are high-tally. If your panel has a
‘None/All’ button, you can use it to select either no levels or all levels.
5 Press a ‘Destination Lock’ button.
Use this same method to protect or unprotect selected levels, using a ‘Destination Protect’ button
instead.
Note that lock buttons are toggles. Therefore, if you select some levels that are already locked and
some that are unlocked, pressing the lock button will invert their status. Locked levels become
unlocked and those that were unlocked become unlocked. The same is true for protect buttons.
Takes
Pressing a source button completes a take, in any mode. Following are brief instructions on how to
perform a take under 4 cases.
Case 1 — Single-Destination Mode
Takes in single-destination mode are all-level. Follow these steps:
1 Verify that the default destination appears in the ‘Destination’ field of the display.
2 If the ‘Destination’ field does not show the default destination, of course, a problem exists. Per-
haps the panel is malfunctioning or not configured properly or perhaps the destination has been
removed from the NV9000 system. Any of these conditions is rare and the remedy will depend
on your system.
3 Optionally press ‘Source Shift’ to toggle between the source pages.
4 Press a source button to complete the take. The ‘Status’ field of the display shows the source
you chose.
Case 2 — Single-Destination Mode, Breakaway
Takes in single-destination mode with breakaway are meant to be on selected levels. Follow these
steps:
1 Verify that the default destination appears in the ‘Destination’ field of the display.
2 Press one or more level buttons to selected the levels you want to route. The levels that are
available are those of the default destination. If your panel has a ‘None/All’ button, you can
press that button to toggle between all levels being selected and no levels being selected.
3 Optionally press ‘Source Shift’ to toggle between the source pages.
4 Press a source button to complete the take. The ‘Status’ field of the display shows the source
you chose.
S
A take is all-level when all the level buttons are selected (high-tally) or when none of the level
buttons are selected.
S
If your panel has a ‘Hold’ button, you can use it to preserve the chosen breakaway levels after
the take. Hold “mode” is active when the hold button is high-tally. When hold mode is inactive,
the destination reverts to all levels after the take.