Miranda NV9602, Руководство пользователя, Страница: 43 / 68

NV9602 Control Panel • User’s Guide 33
5. Operation
Operating Concepts
All Source
The button selects a source. The source name appears in the ‘Status’ display. Pressing a source
button completes a take.
The nature of source buttons differs according to the panel’s configured operating mode:
• Single-destination, single-destination with breakaway, and limited X-Y modes
A source button can select one of two sources. The first source belongs to source set 1 and the
second source belongs to source set 2. Pressing a ‘Source Shift’ button toggles the panel
between source page 1 and page 2.
• Multi-destination mode
A source button can select one of two sources, as in the other modes, and it selects a destina-
tion.
Typically several source buttons (in MD mode) will share the same destination. Other groups of
source buttons will also share their own common destination.
The destination for a source button does not change under a source shift.
See
Multi-Destination Operations on page 36.
All Source is Master
Means “source is the master” and makes the source device the master. Otherwise, the destination is
the master. This button (and these concepts) apply only to machine control routes.
The button is a toggle: Press it once to make the source the master (it goes high-tally); press it again
to make the destination the master (the button is low-tally).
The ‘Source is Master’ button is also used to initiate “broadcast” machine control routes. See
Broadcast Routes on page 37.
During data level (i.e., machine control) takes, this button makes the source device the master. Oth-
erwise, the destination is the master.
The button is a toggle that reverses the direction of data routing. For example, if the destination is
the master and the source is the slave, pressing a ‘Source is Master’ button reverses their roles.
Pressing the button again reverses the roles.
The ‘Source is Master’ button is used to initiate “broadcast” control routes. See Broadcast Routes
on page 37.
The panel can be configured so that “source is master” is the default state or so that “destination is
master” is the default. The button still toggles between “source is master” and “destination is mas-
ter.”
S
Pressing the ‘Source is Master’ button turns off the ‘Broadcast’ button and vice versa.
X Source/Destination
The ‘Source/Destination’ button selects either a source or a destination depending on whether the
panel is in source mode or destination mode.
It is the ‘Source/Dest Toggle’ button (listed next) that places the panel in source mode or destina-
tion mode.
X Source/Dest Toggle
The ‘Source/Dest Toggle’ button toggles between source and destination modes.