Miranda Kaleido-X, Руководство по установке

Страница: 20 / 43

14
Kaleido-X (4RU) Installation
KXO-Dual Output Cards
Standard wiring between multiviewer and devices wired to SMPTE “master” specification (e.g. Philips
Jupiter router control system, Miranda Presmaster PCS)
For more information on the RS-422 port’s specifications, see KXO-Dual, and KXO-Dual3 , on
page 32. For more information about RS-422 serial connections, see the “Serial
Connections” section, in the
Routers chapter of the Kaleido-X User’s Manual.
Front Card-Edge Layout
The following diagram shows the various indicators, connectors and buttons that appear
on the output cards’ front edge:
Note:
The RS-422 port on the multiviewer side has no ground pin. Using
the appropriate DE-9S-to-RJ-45 adapter, an external device should be able
to communicate with the multiviewer despite the lack of a ground.
Pinout of each RS-422
port’s RJ-45 connector
on the multiviewer
RJ-45 DE-9 male DE-9 female
Pinout of crossover adapter
(Miranda part no. 1792-3700-100)
Pinout of RS-422
connector on SMPTE
master device