Miranda DENSITE IRD-3802 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 47

Miranda DENSITE IRD-3802 Скачать руководство пользователя страница 9

GUIDE TO INSTALLATION AND OPERATION

IRD-3802 |

9

2 Installation

2.1 Unpacking

Make sure the following items have been shipped with your IRD-3802. If any of the following items are
missing, contact your distributor or Miranda Technologies Inc.

•

IRD-3802 Integrated Receiver and Decoder

•

IRD-3802-3DRP Rear Panel (see figure 2.1)

2.2 Installation in the Densité frame

The IRD-3802 and its associated rear connector rear panel must be mounted in a Densité

3

frame. It is not

necessary to switch off the frame’s power when installing or removing the card. See the Densité

3

Frame

manual for detailed instructions for installing cards and their associated rear panels.

2.3 Rear

Panels

The IRD-3802 has multiple inputs and outputs, and making space for all the necessary connectors at the rear
of the frame requires a double-width rear panel.

With the double-width rear panel installed, the IRD-3802 must be installed in the right-most of the two slots
covered by the panel in order to mate with the panel’s connectors.

If it is placed in the wrong slot, the front panel LED will flash red. Move the card to other slot for correct
operation. No damage will result to the card should this occur.

Figure 2.1

IRD-3802-3DRP Rear Panel for the IRD-3802

«
...
7
8
9
10
11
...
»

Содержание DENSITE IRD-3802
















































Отзывы:

Нет отзывов