Miranda DENSITE IRD-3802 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 47

Miranda DENSITE IRD-3802 Скачать руководство пользователя страница 27

GUIDE TO INSTALLATION AND OPERATION

IRD-3802 |

27

3.4.10 The

Factory/Presets

panel

This panel provides resources for saving, restoring
and transferring the configuration settings of this
IRD-3802.

Load Factory

The IRD-3802 maintains a “Factory Default”
alignment in its memory, to which it can be restored
at any time.

•

Click

the

Load Factory

button to restore the

card to its Factory default alignment.

User Presets

The User Preset controls allow the user to save and
recover all configuration settings on the card.

Select any one of the five presets using the
pulldown list. The name of the currently-selected
User Preset is shown on the on the pulldown icon
(e.g.

User1

,

User2

,…

User5

)

•

Click

Load

to load the contents of the

selected User Preset into the IRD-3802. All
parameter settings and values will be replaced by the contents of the selected User Preset.

•

Click

Save

to store the current parameter settings and values from the IRD-3802 into the selected

User Preset. The existing contents of the preset will be overwritten.

Profiles

This section provides the option to save and recover the entire card configuration (including user presets if
desired) on an external disk, or to copy it to another IRD-3802 card.

Click on

Profiles

to open the Profile Copy window.

Figure 3.20

Profile Copy window

Figure 3.19

Factory / Presets Panel

«
...
25
26
27
28
29
...
»

Содержание DENSITE IRD-3802
















































Отзывы:

Нет отзывов