GUIDE TO INSTALLATION AND OPERATION
IRD-3101 |
31
•
If the file was not saved for some reason, the Transfer Status box to the right of the
Copy profile from
line will
indicate
Failed
against a red background
Restore profile from disk…
Click this button to open an
Open
dialog box within which you
can locate and select a valid IRD-3101 profile file.
•
Click Open to read the contents of the file and to
reconfigure this IRD-3101’s profiles according to its
contents
•
While the reconfiguration is in progress, the Transfer
Status box on the right of the
Copy profile from
line will
indicate
Working
against a yellow background
•
When the reconfiguration is complete, the Transfer
Status box on the right of the
Copy profile from
line will
indicate
Succeeded
against a green background
Note:
There is no need to select a profile using the Profile
pulldown (e.g. current, User1, etc.) when restoring a profile
from disk, because the profile selection is stored within the
file.
Copy profile to section
This line shows other IRD-3101 cards that are available on the iControl network, each identified by App server,
Densité frame and slot number, card type and firmware version.
The
Profile
column shows the same information as is shown for the current card in the Copy profile from line, i.e.
•
Current, User1, User2, User3, User4, User5
The
Select
column includes a checkbox to identify which IRD-3101 cards you wish to copy profiles into from the
current card.
•
For convenience, a
Select all
checkbox is provided in the column header
Click
Copy
to copy the selected profiles from this card into the selected other IRD-3101 cards
•
While the profile copy operation is in progress, the Transfer Status box on the right of the
Copy profile to
line will
indicate
Working
against a yellow background
•
When the profile copy operation is complete, the Transfer Status box on the right of the
Copy profile to
line will
indicate
Succeeded
against a green background
Fig 3.32 Restore profile from disk
