GUIDE TO INSTALLATION AND OPERATION
18
| IRD-3101
Change:
Click the
Change…
button to open the
Select AFD
panel showing the available AFD codes that could be
used as the default. Click on one to select it, then click
Apply
or
OK
at the bottom of the panel.
Flags
This section gives information about AFD flag management.
Presence – the status icon is green if AFD flags are detected in the input data
stream
Detected – the data box shows the AFD code for the detected flags
Inserted – the data box shows the code of the AFD inserted in the output data
stream
v
Aspect Ratio Scaling Mode
Use the pulldown to select the aspect ratio scaling mode that will be used.
These options are available:
•
OFF
•
Auto
•
Stretch
•
Center Cut
•
Letter box
•
Pillar box
3.4.6.2 Metadata / Metadata tab
This panel provides the resources to configure metadata
processing on this IRD-3101.
Closed Captions
Closed Caption
•
ON
•
OFF
Note: for CVBS output, CC is always on, and not affected
by this control
V-Chip Mode
Use the pulldown to select how V-Chip data will be
processed in the IRD-3101:
•
Replace: Will use the PSIP information to replace any
existing XDS data. Use this option if you
know you want to use the PSIP advisory.
•
Pass:
If XDS data is already present, it is left
untouched. In this mode, no V-CHIP is
generated if no XDS data is present.
Figure 3.10 Select AFD panel
Figure 3.11 Video Output panel – metadata/metadata
