Miranda ADX-102i, Руководство по установке и эксплуатации, Страница: 20 / 25

14
3.5 Linear Time Code Extraction
(
OUT->LTC
)
Follow these steps to extract sampled LTC from the selected ancillary data space
(see section 3.10 for ancillary data space selection) of the video input LTC (
SAMP
)
and output as LTC; alternatively, no LTC signal may be output (
NONE
).
1. Press SELECT to enter the menu. OUT is displayed.
2. Press the (+) push-button until LTC is displayed.
3. Press SELECT to enable the LTC insertion menu. The current LTC
insertion setting is displayed.
4. Press (+) or (-) to set the desired setting. Press SELECT to store the new
setting and return to LTC.
5. To return to normal mode, press ESC twice.
3.6 Digital Audio Channels Swap/Mute Selection
(
AES->AES1 to AES2/4/8
)
The AES menu allows to mute and/or swap Left-Right channel for each AES output
signal. Follow these steps to apply these functions:
1. Press SELECT to enter the menu. OUT is displayed.
2. Press the (+) push-button until AES is displayed.
3. Press SELECT to enable the AES menu. AES1 is displayed.
4. Press the (+) or (-) push-button until the desired AES signal is displayed.
5. Press SELECT to access the SWAP and MUTE functions. SWAP is displayed.
6. Press SELECT to enable the SWAP menu. Press (+) or (-) to display ON (and
swap left and right channels) or OFF. Press SELECT to store the new channel
swap setting for the selected AES signal and return to SWAP.
7. Press the (+) push-button once to display the MUTE function.
8. Press SELECT to enable the MUTE menu. Press (+) or (-) to select ON (and
mute audio channels) or OFF. Press SELECT to store the new mute setting
for the selected AES signal and return to MUTE.
9. To return to normal mode, press ESC twice.
3.7 Validity Bit Processing
(
AES-> VBIT
)
This function allows the card to force the setting of the validity bit (V-Bit) if an error
is detected on the input signal. If this function is not set then the V-Bit already
present on the input signal is passed through unmodified.
1. Press SELECT to enter the menu. OUT is displayed.
2. Press the (+) push-button until AES is displayed.
3. Press SELECT to enable the AES menu. AES is displayed. Press (+)
pushbutton until VBIT is displayed.
4. Press SELECT to enable the VBIT menu. The current VBIT setting is
displayed. Press (+) or (-) to display MUTE (to allow the card to set the V-Bit)
or PASS (to leave the V-Bit unmodified).
5. Press SELECT to store the V-Bit setting and return to VBIT.
6. To return to normal mode, press ESC twice.