Miranda ADX-102i, Руководство по установке и эксплуатации, Страница: 15 / 25

9
Normal Mode
When the menu is not being accessed we refer to this as normal mode. When in
normal mode, the display is turned off.
Automatic Exit From Menu After 1-Minute Interval
If the menu is currently being accessed and no push-button has been pressed for 1
minute, the ADX-102i/104i/108i automatically exits from the menu thereby returning
to normal mode. Also, changes made to the current parameter will be stored.
Navigating Through the Menu
The front panel push-buttons are used to navigate the menu of Figure 3.2. The
following describes the function of each push-button when navigating through the
menu.
(
+
): Press (+) to move down in the menu or to increase the parameter
value. For example, if you are currently at A1-2 in the OUT menu,
pressing (+) will scroll downwards through the selections A3-4, A5-6
and A7-8. Depressing (+) during an adjustment will increase the
parameter value or scroll at a faster rate.
(
-
): Press (-) to move up in the menu or to decrease the parameter value.
For example, if you are currently at A7-8 in the OUT menu, pressing (-
) will scroll upwards through the selections A5-6, A3-4 and A1-2.
Depressing (-) during an adjustment will decrease the parameter value
at a faster rate.
SELECT: Changes to a menu parameter are stored immediately to non-volatile
memory. For example, after the desired A1-2 audio source has been
set, press SELECT. The menu returns to OUT and the new audio
source is stored for the AES1 and AES2 signal pair (A1-2).
ESC:
If ESC is pressed after making changes to a parameter, the parameter
is reset to the value it had prior to the change. For example, after
changing the A1-2 audio source, press ESC. The menu is returned to
A1-2 and the previous audio source setting is reloaded.