8
Introduction for buttons on remote controller
screen
Note:
• This is a general use remote controller, it could be used for the air
conditioners with multifunction; For some function, which the model doesn’t
have, if press the corresponding button on the remote controller that the unit
will keep the original running status.
• After putting through the power, the air conditioner will give out a sound.
Operation indictor is ON (red indicator). After that, you can operate the air
conditioner by using remote controller.
• Under on status, pressing the button on the remote controller, the signal
icon “ ” on the display of remote controller will blink once and the air
conditioner will give out a “de” sound, which means the signal has been sent
to the air conditioner.
• Under off status, set temperature and clock icon will be displayed on the
display of remote controller (If timer on, timer off and light functions are set,
the corresponding icons will be displayed on the display of remote controller
at the same time); Under on status, the display will show the corresponding
set function icons.
Press this button can turn on or turn off the air conditioner. After turning on
the air conditioner, operation indicator on indoor unit’s display is ON (green
indicator. The colour is different for different models), and indoor unit will give
out a sound.
Press this button to select your required operation mode.
• When selecting auto mode, air conditioner will operate automatically
according to ex-factory setting. Set temperature can’t be adjusted and will
not be displayed as well. Press “FAN” button can adjust fan speed. Press
“SWING” button can adjust fan blowing angle.
• After selecting cool mode, air conditioner will operate under cool mode.
Cool indicator on indoor unit is ON. Press “▲” or “▼“ button to adjust set
temperature. Press “FAN” button to adjust fan speed. Press “SWING”
button to adjust fan blowing angle.
• When selecting dry mode, the air conditioner operates at low speed under
dry mode. Dry indicator on indoor unit is ON. Under dry mode, fan speed
can’tbe adjusted. Press “SWING” button to adjust fan blowing angle.
• When selecting fan mode, the air conditioner will only blow fan, no cooling
and no heating. Press “FAN” button to adjust fan speed. Press
“SWING” button to adjust fan blowing angle.
ON/OFF button
1
MODE button
2
