Mirabelle GALATIA MIRGA241, Руководство по установке

Страница: 3 / 24

2
BEFORE INSTALLATION
• Confirm that there is enough floor space to install the toilet unit and that the bathroom door will open/close
without obstruction.
• Water Pressure. The product is designed to operate with a minimum working pressure of 20psi
.
INSTALLATION PROCEDURES
Step 1: Put the toilet at the appropriate location, mark
the bolt mounting locations at the rear of the bowl. This
toilet does not use bolts through the closet flange.
Step 2: Drill holes on the ground at the marked locations
with a 25/64” (10mm) drill bit. If installing onto concrete
subfloor, use expansion bolts provided.
Step 3: Confirm that the installation area is clean,
especially around the toilet mounting location. If
installing with a closet flange, ensure the top of the
flange is level with the finished floor for proper seal.
Step 4: Mount the plastic/rubber drain adapter onto the
outlet on the underside of the bowl. Position the toilet
squarely to wall and with a rocking motion, press bowl
down fully to ensure adapter seals into flange.
Step 5: Alternately tighten bolts until toilet is firmly
seated on floor.
CAUTION:DO NOT OVERTIGHTEN bOLTS,OR bASE
MAY BE DAMAGED!
Step 6: Apply clear silicone sealant around the toilet
edges.
Step 7: Connect the inlet line to the water supply.
12”
(305mm)
8-7/8”
(225mm)
13”
(330mm)
28-3/4” (730mm)
Closet Flange
(optional)
2
BEFORE INSTALLATION
• Confirm that there is enough floor space to install the toilet unit and that the bathroom door will open/close
without obstruction.
• Water Pressure. The product is designed to operate with a minimum working pressure of 20psi
.
INSTALLATION PROCEDURES
Step 1: Put the toilet at the appropriate location, mark
the bolt mounting locations at the rear of the bowl. This
toilet does not use bolts through the closet flange.
Step 2: Drill holes on the ground at the marked locations
with a 25/64” (10mm) drill bit. If installing onto concrete
subfloor, use expansion bolts provided.
Step 3: Confirm that the installation area is clean,
especially around the toilet mounting location. If
installing with a closet flange, ensure the top of the
flange is level with the finished floor for proper seal.
Step 4: Mount the plastic/rubber drain adapter onto the
outlet on the underside of the bowl. Position the toilet
squarely to wall and with a rocking motion, press bowl
down fully to ensure adapter seals into flange.
Step 5: Alternately tighten bolts until toilet is firmly
seated on floor.
CAUTION:DO NOT OVERTIGHTEN bOLTS,OR bASE
MAY BE DAMAGED!
Step 6: Apply clear silicone sealant around the toilet
edges.
Step 7: Connect the inlet line to the water supply.
12”
(305mm)
8-7/8”
(225mm)
13”
(330mm)
28-3/4” (730mm)
Closet Flange
(optional)
2
BEFORE INSTALLATION
• Confirm that there is enough floor space to install the toilet unit and that the bathroom door will open/close
without obstruction.
• Water Pressure. The product is designed to operate with a minimum working pressure of 20psi
.
INSTALLATION PROCEDURES
Step 1: Put the toilet at the appropriate location, mark
the bolt mounting locations at the rear of the bowl. This
toilet does not use bolts through the closet flange.
Step 2: Drill holes on the ground at the marked locations
with a 25/64” (10mm) drill bit. If installing onto concrete
subfloor, use expansion bolts provided.
Step 3: Confirm that the installation area is clean,
especially around the toilet mounting location. If
installing with a closet flange, ensure the top of the
flange is level with the finished floor for proper seal.
Step 4: Mount the plastic/rubber drain adapter onto the
outlet on the underside of the bowl. Position the toilet
squarely to wall and with a rocking motion, press bowl
down fully to ensure adapter seals into flange.
Step 5: Alternately tighten bolts until toilet is firmly
seated on floor.
CAUTION:DO NOT OVERTIGHTEN bOLTS,OR bASE
MAY BE DAMAGED!
Step 6: Apply clear silicone sealant around the toilet
edges.
Step 7: Connect the inlet line to the water supply.
12”
(305mm)
8-7/8”
(225mm)
13”
(330mm)
28-3/4” (730mm)
Closet Flange
(optional)
Note: this toilet is Not compatible with off-set
closet flaNges