29
Disassemble the overhead mount assembly and mark the locations of the screw fixings.
Drill the fixing holes and insert the wall plugs.
Caution! Be aware of hidden pipes or cables.
Assemble the retaining disc, collet, seal retainer and small o-ring on to the pipe.
Slide over the bracket and secure with 4x screws supplied.
Slide the shroud, nut and olive over cut end of the showering arm.
Insert cut end of showering arm in to the bracket and tighten the nut.
Slide shroud over the bracket.
3
Important! Flush the pipework before fitting the deluge overhead.
6 mm
Bracket
Shower Arm
Shroud
Back Nut
Collet
O-ring
Olive
Retaining
Disc
Seal
Retainer
Note: O-ring supplied in
separate bag.
