manualshive.com logo in svg

Mira Element Thermostatic Mixer, Инструкция по установке и эксплуатации

Поделиться
Скачать
Mira Element Thermostatic Mixer Скачать руководство пользователя страница 34

34

Filter Blanking 

cap

Filter cap

‘o’ seal

Filter

Inlet Filters

the inlet Filters should be checked and cleaned as necessary every 12 months.

note!

 the inlet Filters must not be removed except for cleaning. if the thermostatic 

Mixer is operated without the Inlet Filters fitted the Warranty on the product will be 

void.

exposed Models

1.

  isolate the hot and cold water supplies and operate the control lever to drain 

any residual water.

2.

  carefully remove the Filter Blanking caps and unscrew the Filter caps with 

the ‘o Key’ (supplied) or a 12 mm hexagonal wrench and remove the Filters.

3.

  Clean the filters under a jet of water to remove any lodged particles.

4.

  Refit the Filters and tighten the Filter Caps.

 

note!

 Make sure that the ‘O’ seal is fitted correctly and not damaged.

5.

  turn on the hot and cold water supplies and check for leaks.

6.

  Refit the Filter Blanking Caps.

Содержание Element Thermostatic Mixer













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды