Mira Element Thermostatic Mixer, Инструкция по установке и эксплуатации

Страница: 22 / 44

22
2. solid Wall or stud Partition
(using Rear Fixing Points on the Thermostatic Mixer)
Finished Wall Thickness
(e.g. tile and adhesive)
Wall Cutout Depth ‘X’
4 mm 81 - 63 mm
6 mm 79 - 61 mm
8 mm 77 - 59 mm
10 mm 75 - 57 mm
12 mm 73 - 55 mm
14 mm 71 - 55 mm
16 mm 69 - 55 mm
18 mm 67 - 55 mm
20 mm 65 - 55 mm
22 mm 63 - 55 mm
24 mm 61 - 55 mm
Finished Wall
surface
Finished Wall
thickness
Depth ‘x’
rear Mounting
2.1 refer to section: ‘1. solid Wall or
stud Partition (using securing
Brackets - Mounting off Front
Face of Wall)’ and follow steps 1.1
to 1.4.
2.2 cut away the plasterboard and/or
brick work to the required depth.
Important! this depth ‘x’ will depend
on the finished wall thickness e.g. tiles
or facia board. refer to the table for
this measurement.
For stud partitions depth ‘x’ refers to
the distance from the rear mounting
e.g. timber noggin, to the front of the
wall (before tiling).