26
1062243-W2-N
Caution! Handle the glass cover
assembly with care.
Hold a wrench across the flats of the
metal connector. Unscrew the filter using
another wrench as shown. Clean or renew
the Filter as necessary. Refit in reverse
order making sure the Filter is screwed
fully home.
Do not overtighten!
Make sure plumbing
connections are sealed before restoring
electricity supply.
Refit the cover making sure it is correctly
located. Do not overtighten the screws.
Servicing
Make sure that the electrical supply is
turned off at the mains and that the water
supply is fully turned off.
Remove the three screws and the cover.
Inlet Filter - Cleaning/Renewing
Read the section
“Important Safety Information”
first
Warning! There are no user serviceable parts inside the shower. Servicing
of the shower must only be carried out by qualified, competent personnel
following the instructions provided in this guide and those provided with
any spare part. Before replacing any parts, ensure that the underlying cause
of the malfunction has been resolved.
Do not overtighten! Make sure
plumbing connections are sealed
before restoring electricity supply.
Cover
Cover Retaining
Screw
Filter
