-
33
-
•
Server Address
The SentryII Server’s IP address.
•
Server Port
The API port number of the SentryII Server. (See
Server Settings
on page 13)
•
Username
The default is admin. This setting must coincide with the defined SentryII users list. (See
User Management
on page 13)
•
Password
The default is admin. This setting must coincide with the defined SentryII passwords list.
(See
User Management
on page 13)
•
On Battery Shutdown
The amount of time in seconds, after the event occurs, before the Remote Client will be
shutdown. If the event is removed before the delay time is reached, the action will be
cancelled. (See
UPS and/or Operating System Shutdown
on page 20)
•
Low Battery Shutdown
The amount of time in seconds, after the event occurs, before the Remote Client will be
shutdown. (See
UPS and/or Operating System Shutdown
on page 20)
NOTE: All Remote clients need to be configured to shutdown before the SentryII Server.
Starting SentryII Services
If, at the end of the installation, you selected to start SentryII, then SentryII should be running. If not, to start SentryII, perform the
following steps:
•
Windows 95/98/ME
1. Click the Windows
Start
button and select
Programs / SentryII / SIIRemote
.
2.
SentryII
Remote is a hidden service and may only be seen by pressing
Ctrl-Alt-Delete
.
•
Windows NT/2000/XP
1. Start the Windows
Services
application.
2. From the Windows
Start Menu
, select the
Settings
menu, and then select the
Control Panel
menu
.
3. Select
the
Administrative Tools
folder, and then select the
Services
application.
4. Locate
the
SentryII Remote
service in the services list.
5. Right
click
SentryII Remote
and select
Start
from the popup menu.
Novell Netware Client
Installation
Step 1. The
SentryII
Remote must be installed from a Windows client computer. This should be done in exactly the same manner as
the
SentryII
Server installation. (see
Novell Netware | Install Procedure
page 7)
