17
16
Chapter 6: Specifications
Waveform Type
True Sine Wave
>95% (Full Load)
50 / 60Hz
208VAC - 49Amps
240VAC - 42.5Amps
208 & 120VAC (Default) / 240VAC (Optional)
Efficiency
Voltage (Selectable)
Frequency
Model Number
SYSTEM SPECIFICATIONS
Current (Max)
Topology
Isolation, Step Down Tansformer, Sine Wave
OUTPUT
INPUT
Number of Phase
Single (1
∅
2W +G)
Voltage (Selectable)
208 (default) / 240VAC
Protection
Resettable Circuit Breaker
Voltage Regulation
N/-3%
Frequency
50 / 60Hz
Protection
Resettable Circuit Breaker
208VAC - 24Amps
240VAC - 21Amps
Audible Noise at 1 m (3 ft.)
ENVIRONMENTAL
Operating Temperature (max)
Operating/Storage Humidity
Operating Elevation
0 to 40
°
C (+32 to +104
°
F)
0 ~ 95% Non-Condensing
0 to 2,000m (0 to +6,562 ft)
PHYSICAL
Weight - Net
Size - Net
L X W X H
Size - Shipping
L X W X H
Weight - Shipping
82.7 lbs / 35.5 Kgs
158.7 lbs / 72.0 Kgs
123.5 lbs / 56.0 Kgs
196.2 lbs / 89.0 Kgs
REGULATORY COMPLIANCE
Safety and Approvals
EMC Verification
cTUVus
(Conforms to UL60950-1:2007 R12.11, CSA-C22.2 No.60950-1-07-A1:2011)
FCC Class B, CE certified
Storage Elevation
0 to 15,000m (0 to +49,213 ft)
Storage Temperature
-15 to +50
°
C (+5 to +122
°
F)
<60 dBA
26.2 x 17.3 x 3.5"
665 x 440 x 88.5 mm
31.6 x 24.4 x 9.1"
802 x 620 x 230 mm
ED8000RT-XFR
ED10000RT-XFR
ED5000RT-XFR
ED6000RT-XFR
25.9 x 17.3 x 5.14"
659 x 440 x 130.6 mm
30.7 x 23.6 x 10.9"
780 x 600 x 276 mm
NOTE:
Specifications are subject to change without notice.
Connection
Attached 2' open-end
#10 AWG power cord
Terminal Block
Hardwire only
10KVA / 10K Watts
Power (Max)
5KVA / 5K Watts
<50 dBA
Harmonic Distortion
<3% (Full Linear Load)
IF THE STEP DOWN TRANSFORMER REQUIRES SERVICE
1. Use the Troubleshooting section in the UPS user's manual to eliminate ob-
vious causes.
2. Verify there are no tripped circuit breakers. A tripped circuit breaker is
the most common issue.
3. Call your dealer for assistance. If you cannot reach your dealer, or if they
cannot resolve the issue call or fax the Technical Support department at
the following numbers; Voice phone (972) 446-7363, FAX line (972) 446-
9011 or visit our Web site at www.minutemanups.com the "Discussion
Board". Before calling the Technical Support Department have the follow-
ing information available:
a)
Contact name and address.
b)
Where and when the unit was purchased.
c)
All of the model information about your unit.
d)
The serial number of your unit.
e)
Any information on the failure, including LEDs that may be illuminat-
ed or error codes displayed.
f)
A description of the protected equipment including model numbers, if
possible.
g)
A technician will ask you for the above information and if possible,
help solve the issue over the phone. In the event that the unit requires
factory service, the technician will issue you a Return Material Autho-
rization Number (RMA #).
h)
If the unit is under warranty, the repairs will be done at no charge. If
the unit is not under warranty there will be a charge for the repair.
4. Pack the unit in its original packaging. If the original packaging is no lon-
ger available, ask the Technical Support Technician about obtaining a new
set. It is important to pack the unit properly in order to avoid damage in
transit. Never use Styrofoam beads for a packing material.
a)
Include a letter with your name, address, day time phone number,
RMA number, a copy of your original sales receipt, and a brief desc-
ription of the problem.
5. Mark the RMA # on the outside of all packages. The factory cannot accept
any package without the RMA # marked on the outside.
6. Return the unit by insured, prepaid carrier to:
Para Systems Inc.
MINUTEMAN UPS
1809 W. Frankford Road, Suite 150
Carrollton, TX 75007
ATTN: RMA # _______
Chapter 5: Obtaining Service
Содержание ED10000R T-XFR
Страница 12: ...21 20 Notes Notes ...
