Minuit Une IVL PHOTON, Руководство по обслуживанию

Страница: 8 / 63

IVL™ Photon Service Manual AA 8
General Safety Information
WARNING!
Humidity, Condensation and Moisture.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not
use the product for 2h when it was exposed to big temperature differences as condensed moisture
may damage the product electrically when switched on.
Never expose the product to dripping water or water splashes.
Never place an object filled with liquid (e.g. a vase or a bottle filled with liquid) on the product.
Do not bend the power cable directly after the connector. Water could immerse and cause short
circuits and damage the connector.
WARNING!
Risk of electric shock and fire.
Socket outlets or external power switches used to supply the product with power must be located
near the product and easily accessible to be able to isolate the product from power immediately.
The power cable must be equipped with a Neutral Powercon TRUE1 NAC3FX-W-TOP cable connector.
You can install a suitable power plug on the power cord. Always use a power plug according to IEC
60309-1 or a similar national standard.
Disconnect the product from AC power before moving it or cleaning it.
To link several products to one power chain, please observe:
•
This fixture has a maximal power consumption of 200W (for one unit)
•
Always use an AWG 14 power input cable and AWG 14 power throughput cables.
•
Never link more than 10 products to a power chain when using these cables.
Ensure that the airflow around the product is free and unobstructed.
Provide a minimum clearance of 0,3 m (1 in.) around fans and air vents.
No flame source, like a candlelight, should be placed on or nearby the product.
This product is intended to be used in temperate climate.
Do not operate the product if the ambient temperature is above 40°C (104°F) or below
0°C (32°F).
WARNING!
Risk of injury and damage through falls.
Always install the product as described in this manual.
Always follow the safety information when suspending the product. Always use a secondary
attachment as described in this manual to prevent falls if the primary attachment fails.
Block access area during installation of the product due to risk of injury through fall.
Always work on a stable platform.