Minuit Une IVL PHOTON, Руководство по обслуживанию

Страница: 31 / 63

IVL™ Photon Service Manual AA 31
REP6:
REPLACING MT1-000935- LATERAL-
BELT-ACTUATOR-ASSEMBLY (TILT
MODULE)
Tools
needed:
- TORX T20 screwdriver
Instructions Diagram
6.1
You first need to remove the MT1-
001068-INTERNAL-TOP-COVER
(see
section
REP5:
)
Gently unplug the connector MT1-
000672 of the tilt module from the back
of the fixture, like shown in the diagram.
Make sure not to lose the rubber seal
MT1-001057 of the connector when
unplugging it.
To remove MT1-000935 tilts 1 and 2, the
mother board MT1-000139 must be
removed first.
To remove MT1-000935 tilt 3 the MT1-
000705 power supply must be removed
first.
6.2
Unscrew the 3 MT1-001699 screws using
a TORX T20 screwdriver, like shown in
the diagram.
Make sure not to lose the screws and
MT1-001991 washers.