minrray UV520-ST, Руководство пользователя

Страница: 16 / 44

Notes:
1) After power on and self-checking, the camera will automatically return to the preset 0 position if it’s pre-set.
2) The default address for the IR remote control is 1#. If the menu restored to factory defaults, the remote
control default address will restore to 1#.
3.1.2 Video Output
1) Network output
a. Network cable connection: as shown in Figure 1.1 label 15.
b. Webpage Login: open your browser and enter 192.168.5.163 (factory default) in the address bar; press
Enter to enter into the login page, click on the “player is not installed, please download and install !" and
follow the installation steps for installation. Then enter the user name
admin and password admin (factory
default); press Enter to enter into the preview page, users can carry out PTZ control, video recording,
playback, configuration and other operations.
2) HDMI Video Output
a. HDMI video cable connection: as shown in Figure1.1 label 13.
b. Connect the camera and the monitor via HDMI video cable, and the video output is available after the
camera self-test.
3) SDI Video Output
a. SDI video cable connection: as shown in Figure1.1 label 12.
b. Connect the camera and the monitor via SDI video cable, and the video output is available after the
camera self-test.
4) CVBS Video Output
a. CVBS video cable connection
b. Connect the camera and the monitor via CVBS video cable, turn the dial to D or E, power off and restart,
and the video output is available after the camera self-test.
3.2 Remote Control
3.2.1 Match Code for Wireless Remote Control