EN-15
Inserting and Removing an SD Memory Card (Optional
Accessory)
The digital camera comes with 16MB of internal memory (14MB available for image
storage), allowing you to store captured still images or video clips in the digital
camera. You can also expand the memory capacity by using an optional SD (Secure
Digital) memory card so that you can store more files.
1. Make sure your camera is turned off before
inserting or removing a memory card.
2. Open the waterproof door and then the inside
battery cover.
3. Insert an SD memory card in the correct
orientation as shown in the illustration.
4. Close both the battery cover and waterproof
door and lock the latch.
To remove the SD memory card, make
sure the camera is turned off. Press lightly
on the edge of the memory card and it
will eject.
Be sure to format an SD memory card
with this digital camera before using it.
Refer to section in the manual titled
“Formatting an SD Memory Card or
Internal Memory”
for further details.
To prevent valuable data from being
accidentally erased from an SD card,
you can slide the write protect tab (on
the side of the SD memory card) to
“LOCK”.
To save, edit, or erase data on an SD
memory card, you must unlock the card.