EN-14
PREPARING THE CAMERA
Installing the Batteries
Use 2 AA size batteries to power the camera.
Make sure that the power is off before inserting
or removing the batteries.
1. Slide the latch lock to unlock the latch and
open the waterproof door as shown in the
illustration.
2. Open the inside battery cover and insert the
batteries in the correct orientation as shown
in the illustration.
3. Close both the battery cover and waterproof
door and lock the latch.
To remove the batteries,turn the camera
off before removing batteries and hold
the camera with the waterproof door
facing sideways, then open the door.
Important
: Make sure that you and the camera
are dry before opening the waterproof door.
Be careful not to drop the batteries when opening or closing the battery
cover.
Opening the waterproof door with the camera held sideways will prevent
waterdrops from entering the internal electronic areas.
1
2
3