MINOURA V130M Скачать руководство пользователя страница 2

IMPORTANT NOTICE

• For use with a normal 2-wheel bicycle only. Do not use a tandem, recumbent, or other.

• Fits tire size between 26x1.0 and 700x45c. 29-inch is not compatible on this model.

To use 26x1.0" or smaller tire, install the Z-shaped Small Wheel Adapter (included).

• Some assembly required. Use correct tools (10mm spanner & M4 hex wrench). Tools 

are not supplied in the kit.

• Use the supplied rear quick release skewer for maximum stability.

Minoura is not responsible for any problem caused from using your own skewer.
(* Quick release skewer = A wheel axle device which allows mounting/disengaging the 
wheel without any tool)

• If your bike wheel is not equiped with a quick release skewer but a standard hub nut 

type axle, remove the black plastic Grommet (F-9) from the Right Side Coupling (F-1) 
for a more secure fit.
It is not possible to convert a hub nut type wheel axle to a quick rekease skewer type 
unless you replace the entire wheel.

• Use on flat and level floor or ground for your safety.

• Adjust the roller pressure to the rear tire properly in order to maximize your tire life.

Tire-to-roller contact will eventually wear both your tire and the trainer roller. This is 
normal and should be expected with normal use.

• Touching the spinning wheel and/or any other moving parts while training could cause 

serious injury. Keep children and pets away from the trainer when in use.

• If you hear any strange noise or smell any odor coming from the V130M, immediately 

stop using the trainer and contact the retailer you purchased the trainer from to get 
support.

• Any warranty will be void if you use V130M for ANY purpose other than instructed.

Minorua offers a 1-year limited warranty on the resistance unit and a 5-year limited 
warranty on the frame from the date of your purchase for any problem caused by 
manufacturer's defect.
Any damage or problem other than manufacturer defect is not covered under 
warranty.
Any damage from shipping or moving must be made to the shipping company.
Read the enclosed "Minoura Limited Warranty Policy" card for more detail.

- Page 2 -

Содержание V130M









Отзывы: