Minolta magicolor 2210, Руководство пользователя

Страница: 48 / 176

Media Storage 46
4
Place the envelope stack into the multipurpose tray with the flap-side up.
Check your application documentation to determine if the flap should be
placed on the left or on the right. Print a single envelope to check the ori-
entation before printing multiple copies.
5
Adjust the media guides to the width of the envelopes.
Make sure the guides are snug enough to keep the envelopes straight,
but not so tight that they buckle the envelopes.
6
Open the flap of each envelope immediately (before it cools) after the
envelope is delivered to the output tray.
5 "
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
Printing Area
The printing area on all media sizes is up to
about 0.157 inch (4 mm) from the edges of the
media.
Media Storage
When storing media, avoid:
„
Direct sunlight
„
Excess heat and humidity
„
Dust
If media has been removed from its wrapper, place it in its original packaging
and store in a cool, dark place on a level surface.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500