55
54
APPENDIX
CUSTOM FUNCTIONS
3. After making your selections,
press the flash on/off button to
return to exit the custom
mode.
• When a setting other than the default set-
ting is selected in custom mode, the cus-
tom lamp remains lit.
• If “canceled” is selected in #1, the flash will not turn off automatically.
• If “no limit” is selected in #2, the ring flash’s focus lamps will remain lit
until the A-B/ Lamp button is pressed again.
• To preserve the life of the focus lamps, do not keep them lit for long
periods. Care should be taken when using the focus lamps when the
auto power off period and the focus-lamp illumination period allow the
continuous operation of the lights.
• When “All modes” is selected in #3, manual flash photography may be
used with all the camera’s exposure modes. The setting is provided
for the sake of convenience, however, this may result in incorrect
exposures with exposure modes other than M mode; M mode is rec-
ommended for optimum results with manual flash photography.
• If “1/2EV steps” is selected in #4, use the gray power values provided
on the lower scale of the manual-flash-control dials. The half stop val-
ues are not written on the scale. The power values are 1/1, 1/1.4, 1/2,
1/2.8, 1/4, 1/5.6, and 1/8.
• The selected settings are maintained even when the flash unit is
turned off, or the batteries are removed.
