MINOLTA-QMS Remote Console, Руководство пользователя

Страница: 8 / 46

4
If the operator password is enabled, you are prompted to enter it before you can use
remote console. The password is case-sensitive and can have up to 16 characters. If you
enter an invalid password, the connection to remote console closes automatically.
This example shows how a session is closed automatically when the wrong password is
used:
[b
@
venus, 40] telnet 6100
↵
Trying 161.33.128.183 ...
Connected to 6100.
Escape character is ’^]’.
QMS Console Manager
magicolor 6100
−>
Enter Password :A0012
↵
*** Invalid password ***
Connection closed by foreign host.
This is an example of how a session begins with a correct password:
[b@venus, 41] telnet 6100
↵
Trying 161.33.128.183 ...
Connected to 6100.
Escape character is ’^]’.
QMS Console Manager
magicolor 6100
−>
Enter Password :A100
↵
magicolor 6100
−>
Idle
magicolor 6100
−>
You have now entered a remote console session. Now see “Remote Console Commands”
on page 10 for information on using remote console.
If You Cannot Start a Telnet Session
There are two situations where an attempt to start a Telnet session may fail:
1
The maximum number of remote console sessions that can be open at the same time
has been reached.
The system allows a maximum number of remote console sessions to be open at the
same time. If this number is reached, the system rejects further requests for new con-