MINOLTA-QMS Magicolor 2300W Скачать руководство пользователя страница 19

Страница: 19 / 150

Media Types

Dusty

Wet (or damp)

Keep media between 35% to 85% relative humidity. Toner does
not adhere well to moist or wet paper .

Layered

Adhesive

Folded, creased, curled, embossed, warped, or wrinkled

Perforated, three-hole punched, or torn

Too slick, too coarse, too textured

Different in texture (roughness) on the front and back

Too thin or too thick

Stuck together with static electricity

Composed of foil or gilt; too luminous

Heat sensitive or cannot withstand the fusing temperature (356°F/180°C)

Irregularly shaped (not rectangular or not cut at right angles)

Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons

Acidic

Any other media that is not approved

Thick Stock

Paper thicker than 24 lb (90 g/m

) bond is referred to as thick stock. Test all

thick stock to ensure acceptable performance and to ensure that the image
does not shift.

Capacity

Tray 1

Up to 50 thick stock sheets, depending on their
thickness. Thick stock is supported only in letter,
A4, or smaller media sizes.

Orientation Face up

Type

Check www.minolta-qms.com/support (click on "Answer
Base") for currently approved media.

Driver
Media Type

Thick stock

Weight

25–43 lb bond (91–163 g/m²)

Duplexing

Not supported

Notes

43 lb (163 g/m²) bond is also referred to as 90 lb index stock.

Содержание Magicolor 2300W























































































































































Результаты поиска

Содержание Magicolor 2300W

Отзывы:

Похожие инструкции для Magicolor 2300W

Бренды по названию

Популярные бренды

MINOLTA-QMS Magicolor 2300W, Руководство пользователя

Результаты поиска

Содержание Magicolor 2300W

Отзывы:

Похожие инструкции для Magicolor 2300W

Бренды по названию

Популярные бренды