MINOLTA-QMS Magicolor 2300W Скачать руководство пользователя страница 116

Страница: 116 / 150

Repacking the Printer

110

Open the duplex option’s cover and
loosen the two thumbscrews until
the duplex option moves freely away
from the right side of the printer.

Lift duplex option up and away from
the printer.

Install the original right-side cover
that came with the printer with two
screws.

Repack the duplex option in its
original shipping carton for storage
or shipment.

If you’re returning the printer for
service, you don’t need to return
the duplex option, unless the
problem is with the duplex
option.

D. Remove the Waste Toner Bottle, Plug the Openings,
and Dispose of It According to Your Local Regulations

Open the printer’s front door, grasp the waste toner bottle’s handle, and
pull the waste toner bottle outward and upward.

Carefully remove the waste toner bottle.

Keep the waste toner bottle upright
while the openings are not covered,
so the toner does not spill.

Place the removed waste toner
bottle, with the openings facing up,
on a stable surface (not the printer).

Remove the two caps by turning
them

counterclockwise.

Secure the two caps onto the two
openings by turning them

clockwise.

Содержание Magicolor 2300W























































































































































Результаты поиска

Содержание Magicolor 2300W

Отзывы:

Бренды по названию

Популярные бренды

MINOLTA-QMS Magicolor 2300W, Руководство пользователя

Результаты поиска

Содержание Magicolor 2300W

Отзывы:

Бренды по названию

Популярные бренды