MINN KOTA Riotide SP, Руководство пользователя

Страница: 5 / 26

OPERATION
5
TO STOW:
Push down to release tilt lock lever
and raise the motor by pulling up on
the composite shaft or control head.
Pull the motor toward the stern until
it rests securely on the ramp and
the Grip Glide Lever captures the
collar.
TO DEPLOY:
Push firmly down on the Grip Glide
lever to release the collar and slide
the motor forward, out from the ramp.
Lower the motor to the desired depth.
Make sure it clicks into a secure, ver-
tical position.
TO ADJUST DEPTH:
Firmly grasp and hold the composite shaft
above the PowerDrive housing. Loosen
the depth/drive collar knob until the shaft
slides freely. Raise or lower the motor to
the desired depth. Tighten the depth/drive
collar knob to secure the motor in place.
TO ADJUST LATCH COLLAR:
The latch collar is adjustable. If needed, loosen the Phillips head screw and rotate the collar up
or down to re-align the latch and collar. The ideal adjustment is a slightly loose fit that completely
captures the collar.
WARNING: WHEN RAISING OR LOW-
ERING MOTOR, KEEP FINGERS
CLEAR OF ALL HINGE AND PIVOT
POINTS AND ALL MOVING PARTS.
Grip Glide Lever
Tilt Lock lever