14
TECHNICAL SPECIFICATIONS
Table 4 - Technical Specifications
Model:
MIN-6
MIN-9
Flow Rate (GPM):
6
9
Inlet\Outlet Size:
3/4”m NPT
3/4”m NPT
Number of Lamps:
1
1
Lamp Model No.:
05-1370-R
05-0097A
Length:
22-17/32”
29-17/32”
Width:
4-1/4”
4-1/4”
Height:
5-3/8”
5-3/8”
Chamber Diameter:
4-1/4”
4-1/4”
Shipping Weight:
14 Lbs.
18 Lbs.
Voltage:
j
120V 50/60Hz
120V 50/60Hz
Power Consumption:
k
21 Watts
32 Watts
Max Operating Pressure:
100 PSI
100 PSI
Ambient Temperature:
35° F - 100° F
35° F - 100° F
Quartz Sleeve:
1
1
Sentry
TM
Safety Sensor
Optional
Optional
Audio Alarm:
Optional
Optional
Time Delay Mechanism:
Optional
Optional
Elapsed Time Indicator, Universal Input
Optional
Optional
Solenoid Valve:
Optional
Optional
Flow Control:
Optional
Optional
WARNINGS
12volt and 24volt Direct Current (DC) ballasts and units.
Many Individuals regard ballasts and units powered by 12volt and 24volt Direct Current (DC) to be relatively benign
from a safety standpoint. However, a DC ballast, in order to operate an ultraviolet discharge lamp, must produce an
output as high as 600volts. This voltage is high enough to produce a very serious or even lethal electric shock.
IT IS IMPERATIVE
that all DC ballasts and DC ultraviolet units be wired and grounded appropriately.
Failure to ground all Direct Current (DC) ballasts and/or the equipment it is employed in, can
result in serious injury or death.
j
220V 50Hz, 220V 60Hz, 12V, or 24V DC units are also available. Consult Factory for specific voltage requirements.
k
Total power consumption, including ballast loss (based on 120V unit).
All specifications, dimensional data, etc are approximate and subject to change without notice.
