38
6. MAINTENANCE
WARNING
To avoid electric shock, remove the test leads from
the circuit before opening the multimeter.
1. Repairs and services not covered by this instruction
manual must be done only by qualified technician.
2. Periodically wipe the housing with a damp soft
cloth and mild detergent. Do not use abrasives or
solvents.
6.1 Battery Replacement
To replace the battery, follow the procedure listed
below.
1. Disconnect the test leads from the circuit under
test and turn off the meter.
2. Disconnect the test leads from the meter.
3. Place the meter with front panel over a soft surface.
4. Remove the screws located in the rear case.
5. Carefully separate the front case from the rear
case.
6. Carefully remove the old batteries replacing for a
new one.
7. Replace front case in the rear case.
8. Refasten the screws.
