11. As shown in the figure, glue the fuselage side strips (and vertical tail) to the inside of the right
fuselage side panel in the order of A-B-C-D-E-F.
·The fuselage
side strips are made of flexible material, which can be bent before bonding.
·In strict accordance with the
A-B-C-D-E-F sequence installation, can ensure the accurate position
of the fuselage side strips.
·The
fuselage side strips should be aligned with the fuselage side plate contour, which is helpful
to the model aesthetics.
12. The installation of fuselage side plate is completed, as shown in the figure.
Take 200 mm conduit and two duct seats for elevator drive.
