5. Screw in another m1.2x6 screw from the right side to form the motor line limit to prevent the
motor line from interfering with the motor base movement or propeller running.
6.Connect the servos to a powered receiver. Bind the receiver with your transmitter to make the
servos return to their neutral point. Test whether the servos are working normally, and install the
servo arms according to the position shown in the picture. (use screws to fix the servos on the
servo base from the top.)
Note: Please make sure that the servos have been tested and installed in strict accordance with
the following picture. After assembling the model, it will be not able to adjust.
