MINIMOTO ATV ELECTRIC POWERED, Инструкция по эксплуатации

Страница: 18 / 31

MINIMOTO ™ ATV MINIMOTO ™ ATV MINIMOTO ™ ATV MINIMOTO ™ ATV
16
TIRE INFLATION PROCEDURE
:
IMPORTANT:
Before inflating any tire, make sure
the KEY is removed from the vehicle.
To inflate a tire, unscrew the protective cap
from the valve stem and attach the bicycle
pump as you would with any bicycle.
WARNING: Tire inflation must be done
ONLY BY AN ADULT ONLY. NEVER inflate
the tires above 30 PSI. Tires should be
inflated with a standard “bicycle” type
pump. Inflation at an Automobile service
station can easily result in over inflation
of the tires. Over inflation of the tires
can result in serious injury or even death.
Tires MUST be at the proper inflation
in order to achieve good handling
characteristics and control. Over
inflation will make the tires “bulge”
outward. This will cause premature
wear of the tire. Under inflation will
cause the tire to look flat on the
ground. This will result in poor run-
ning speeds and handling. Make
sure that your tires are properly
inflated to get the most out of your
vehicle.
TIRE REPAIR:
In the event that a tire should consistently
loose air pressure, the tires can be
repaired at a local bicycle repair shop.
The tires have an inner tube construction.
WARNING: Inspect tires regularly.
1) If the tire tread is worn to the point
where the grooves are difficult to see,
replace the tire(s) immediately.
2) If the tire tread shows uneven wear,
check the axle to make sure the wheel is
loaded evenly and correctly. Uneven wear
may be a sign of uneven loading.
3) If the rims (wheels) are bent or cracked,
they must be replaced.