miniland baby digimonitor 3.5 plus, Руководство пользователя

Страница: 35 / 124

ENGLISH
The baby cannot be
heard on the parents'
unit
The adjustment of the parents'
unit volume is too low
The sensitivity adjustment of
the baby unit is too low
Adjust the volume to the
highest level
Increase the sensitivity level
adjustment of the baby unit
Interferences or
unsatisfactory reception
There are mobile phones or
wireless phones too close to
the baby monitor
Keep the phones away from
the device
It is not possible to
charge the battery
on the parents' unit
The AC/DC adapter has not
been plugged in
Plug in the adapter to an
electric socket
A non-rechargeable battery
has been used
Only rechargeable batteries
can be used (3,7 V – 1200mAh
Li-ion battery). test the battery
and, where necessary, change
it for the one supplied with the
appliance
Images are only shown
in black and white
Check whether the camera is
in the night vision/”infrared”
mode
To see the images in colour,
increase the light at the
placwhere the camera is located
The parents' voices
cannot be heard on
the baby unit
The adjustment of the baby
unit volume is too low
Adjust the volume to the
highest level
The camera is not
transmitting
The Camera has not come on Press and keep pressed in
the button (II) for 2 seconds
Camera: The AC adapter has
not been plugged in
Plug in the AC adapter
The VOX mode is active To see the monitored area
continuously, you must
disconnect the VOX mode
on the monitor.
Problem Possible Cause Solution
No images are shown
but sounds are heard
The monitor battery charge is
low (check the LED indicator)
Plug in the AC adapter or
charge the battery
The connection has been lost
between the monitor and a
camera which is already
connected.
Pair the camera with the
monitor again
The VOX mode is active To see the monitored area
continuously, you must
disconnect the VOX mode
on the monitor.
The monitor is out of range Bring the monitor closer
to the camera
There is no reception
on the monitor
35