miniland baby digimonitor 3.5 plus, Руководство пользователя

Страница: 27 / 124

5. USAGE INSTRUCTIONS
5.1. BEFORE USE
5.1.1. PARENTS' UNIT POWER SUPPLY AND BATTERY USAGE
The monitor, the parents' unit, of this baby monitor is designed for use with the battery or
with the AC/DC adapter supplied. The rechargeable battery must be charged for at least
eight hours before using the unit for the first time or if it has not been used for a prolonged
time period.
Your baby monitor comes with a rechargeable, 3.7V 1200mAh Li-ion battery for the
monitor. We would recommend using the battery in the monitor so as to be able to receive
the audio/video signal from the camera anywhere. Connect the monitor to the adaptor
plugged into the mains whenever possible so as to keep the battery charged.
BATTERY INSTALLATION (Figure 3)
1. Unscrew and remove the battery compartment cover (16) situated at the rear of the unit.
2. Insert the Li-ion battery (supplied).
3. Put the battery cover back in its place and secure it with the screw.
Precaution: Only use batteries of the recommended type as otherwise there is a risk
of explosion. Dispose of worn out batteries responsibly.
Note: The parents' unit is equipped with a battery saving function with a view to
prolonging battery life. When you don't use the two units, it is recommended to turn
them off in order to save the battery.
CHARGING THE BATTERY
Insert the rechargeable battery in accordance with the instructions stated in the previous
section.
Connect the AC adapter connector to the mini-USB socket situated on the side of the unit
(14). Only use the adapter supplied. Plug in the adapter to the mains.
Whilst the monitor is connected to the mains and charging, the left-hand side of the on/link
LED (1) will remain on in green. If the charger remains connected to the mains but the
charging process is complete, the left-hand side of the LED (1) will go out.
When the monitor isn't connected to the mains, the left-hand side of the LED (1) will remain
off.
When the battery charging level is very low, the message “LOW BATTERY” will be
displayed on the screen and the battery level icon (e) will be shown in red. Furthermore,
the left-hand side of the on/link LED (1) will flash red for a few seconds before the monitor
goes off.
ENGLISH
4.2. CAMERA CONTROLS AND FUNCTIONS (Figure 2)
I. Retractable antenna
II. On button
III. Hook-up to hang it up
IV. Loudspeaker
V. Link button
VI. Mini USB power connector
VII. on/link LED indicator
VIII. Microphone
IX. Lens
X. Infrared
XI. Accompanying light
XII. Hook for the tripod
27