miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
25
3.2.4
Wiring tips
If connecting the miniDSP Balanced 2x4 or Balanced Kit to equipment that uses XLR connectors, suitable cabling
can often be made quickly by cutting XLR-XLR or microphone cables in two. The two halves are then used for
input and output, as shown here:
If connecting to equipment with RCA connectors, suitable cabling can often be made quickly cutting RCA cables
in two. Note the connection scheme shown in the diagram (and explained on the previous page): the cable
shield must be connected to the ‘−’ terminal on the miniDSP input, whereas on the output side, the ‘−’ is not
connected.
