Minicom IP Control, Руководство пользователя

Страница: 16 / 63

Installation
Mounting the IP Control Unit
14
| IP Control
Figure 3 – IP Control Unit Connected to a Rack
Figure 4 – IP Control Unit Connected to a Tabletop
2.3.1
Rack Mounting Safety Considerations
When mounting IP Control onto a rack, avoid the following conditions:

Elevated operating ambient temperature
– The operating ambient temperature of
the rack environment may be greater than the room ambient temperature.
Therefore, take special care when installing the unit in a closed or multi-unit rack
assembly that the environment is compatible with the maximum rated ambient
temperature.

Reduced airflow
– Install the equipment in a rack in such a way that the amount of
airflow required for safe operation is not compromised.

Uneven mechanical loading
– Uneven loading can cause damage to the equipment
or personal injury. Mount the equipment in the rack in such a way that a
hazardous condition does not result due to uneven mechanical loading.

Circuit overloading
– When connecting the equipment to the supply circuit, make
sure that the total power of all the components does not exceed the circuit
capabilities. Overloading of circuits can affect over-current protection and supply
wiring, potentially resulting in fire and shock hazards.

Unreliable earthing
– Maintain reliable earthing of rack-mounted equipment. Pay
attention to supply connections other than direct connections to the branch circuit
(for example, use of power strips).
2.3.2
Mounting the Unit
The IP Control unit comes with screw holes on the side, for easy rack or tabletop
mounting.