CAT5 VGA/DATA TRANSMITTER
1
1. Introduction
The CAT5 VGA/DATA Transmitter (VDT) from Minicom transmits high-resolution
computer video (VGA) and RS232 signals along a shielded CAT5 cable. (The RS232
signals are Transmit and Receive only).
This Installation Guide illustrates the VDT and explains how to install it.
2. Features
•
Transmits along the shielded CAT5 cable up to a distance of 110m
•
Controls a projector/plasma screen or any RS232 device connected to the
Remote unit
•
Extends your VGA screen up to 110m
•
Built-in cables
•
Local screen connects to the Local unit
•
2 LEDs on each unit. One indicates the power supply is connected, the other
indicates that a transmission is in progress
3.
Connecting the VDT system
The figure on page 2 illustrates the Local and Remote VDT unit connections.
Also connect a Power adapter to each unit (not illustrated).
Once connected the VDT system is ready to transmit VGA and RS232 signals.
4.
DB9 pin connection
•
Pin 2 - Transmit
•
Pin 3 - Receive
•
Pin 5 - Ground
5. Picture
adjuster
Use a screwdriver to turn the picture adjuster on the Remote unit, to get a clear
projected image.
