Mini COUNTRYMAN 2018, Руководство пользователя

Страница: 74 / 200

The LED is illuminated when the safety
function is switched on.
Malfunction
General
In certain cases, it is possible that the win-
dow functions may be limited.
– The window functions may be limited
after a power cut during the opening or
closing operation. In this case, the sys-
tem must be initialised.
– The power window motors are equipped
with overheating protection. If a win-
dow is opened and closed repeatedly
within a short period of time, the over-
heating protection switches off the mo-
tor temporarily. It will only be possible
to close the window, or possibly no lon-
ger operate it at all, depending on the
degree of overheating.
In this case: allow the power window
motor to cool down.
Initialising the system
The system can be initialised when the ve-
hicle is stationary and the engine is run-
ning.
During the initialisation, the window con-
cerned closes without the anti-trap mecha-
nism.
WARNING
Parts of the body can become trapped
when the windows are operating. There is
a danger of injury or damage to property.
When opening and closing, make sure that
the area of movement of the windows is
kept clear.
1. Open the window in question com-
pletely.
2. Pull the switch as far as the resist-
ance point and hold it there.
The window is closed.
3. Continue to hold the switch pulled
as far as the resistance point.
After approximately 15 seconds, the
window opens and closes once or twice,
depending on the fitted equipment.
4. Release the switch.
Panorama Glass Roof
General
In the event of an accident of sufficient se-
verity, the glass roof is automatically un-
locked.
Safety note
WARNING
Parts of the body may become trapped
when the Glass Roof is operating. There is
a danger of injury. When opening and
closing, make sure that the area of move-
ment of the Glass Roof is kept clear.
Seite 74
CONTROLS Opening and closing
74
Online Edition for Part no. 01402988211 - II/18
Draft
from
BA-76