Mini COUNTRYMAN 2018 Скачать руководство пользователя страница 183

Страница: 183 / 200

Switching off

Press the button on the steering

wheel.

The displays turn off. The saved desired

speed is deleted.

Interrupting manually

When the system is activated, press

the button on the steering wheel.

Interrupting automatically

The system interrupts automatically in the

following situations:

–

If the driver applies the brakes.

–

If the clutch is pressed for a few seconds

or released with no gear engaged.

–

If too high a gear has been engaged for

the speed.

–

If selector lever position N is engaged.

–

If Dynamic Traction Control DTC is acti-

vated or Dynamic Stability Control DSC

deactivated.

–

If Dynamic Stability Control DSC inter-

venes.

Setting the speed

Holding or setting the speed

Press the or button while the sys-

tem is interrupted.
If the system is switched on, the current

speed is maintained and saved as the de-

sired speed.
The saved speed is shown in the instrument

cluster.
Dynamic Stability Control DSC is switched

on, if necessary.

Changing the speed

or button: press repeatedly until the

desired speed is set.
If the system is active, the displayed speed

is stored and the vehicle reaches the stored

speed when the road is clear.

–

or button: every time it is

pressed to the resistance point, the de-

sired speed is increased or decreased by

approximately 1 km/h, approximately

1 mph.

–

or button: each time the button is

pressed beyond the resistance point, the

desired speed changes to the next multi-

ple of 10 km/h on the speedometer dis-

play.

–

or button: pressing up to the re-

sistance point and holding it there accel-

erates or decelerates the vehicle without

the accelerator pedal being pressed. The

speed is maintained after letting go of

the switch. Pressing beyond the resist-

ance point accelerates the vehicle more

rapidly.

Resuming Cruise Control

General

If Cruise Control is interrupted, it can be re-

sumed by calling up the saved speed.
Before calling up the saved speed, make

sure that the difference between the cur-

rent speed and the saved speed is not exces-

sively large. Otherwise, there may be inad-

vertent braking or acceleration.

Resuming a saved speed

Press the button on the steering

wheel.

The saved speed is resumed and main-

tained.

Seite 183

Driving comfort

CONTROLS

183

Online Edition for Part no. 01402988211 - II/18

Draft

from

BA-76

Содержание COUNTRYMAN 2018









































































































































































































Результаты поиска

Содержание COUNTRYMAN 2018

Отзывы:

Похожие инструкции для COUNTRYMAN 2018

Бренды по названию

Популярные бренды

Mini COUNTRYMAN 2018, Руководство пользователя

Результаты поиска

Содержание COUNTRYMAN 2018

Отзывы:

Похожие инструкции для COUNTRYMAN 2018

Бренды по названию

Популярные бренды