Mini COOPER SE, Руководство пользователя

Страница: 137 / 286

The indicator light in the instrument cluster
is illuminated when the low beams are
switched on.
System limits
The automatic headlight control cannot
serve as a substitute for your personal judg-
ment of lighting conditions.
For example, the sensors are unable to de-
tect fog or hazy weather. In these situa-
tions, switch the lights on manually.
Daytime running lights
General information
Position of switch: , ,
The daytime running lights light up when
standby state is switched on. After standby
state is switched off, the parking lights light
up in position .
Activating/deactivating
In some countries, daytime running lights
are mandatory, so it may not be possible to
deactivate the daytime running lights.
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Lighting"
4. "Exterior lighting"
5. Select the desired setting.
Settings are stored for the currently used
vehicle key.
Cornering light
General information
Position of switch:
In tight curves, for instance on mountain-
ous roads or when turning, an additional,
cornering light is switched on that lights up
the inside of the curve when the vehicle is
moving below a certain speed.
The cornering light is automatically
switched on depending on the steering an-
gle or, where applicable, the use of turn sig-
nals.
When driving in reverse, the cornering
lights may be automatically switched on re-
gardless of the steering angle.
Adaptive headlight range con-
trol
The adaptive headlight range control fea-
ture balances out acceleration and braking
processes as well as the vehicle load condi-
tions in order to avoid dazzling oncoming
traffic. Illumination of the road is optimized.
High-beam Assistant
Concept
The high-beam Assistant detects other traf-
fic participants early on and automatically
switches the high beams on or off depend-
ing on the traffic situation.
General information
The high-beam Assistant ensures that the
high beams are switched on, whenever the
traffic situation allows. In the low speed
range, the high beams are not switched on
by the system.
The system responds to light from oncom-
ing traffic and traffic driving ahead of you,
and to ambient lighting, for instance in
towns and cities.
Seite 137
Lights CONTROLS
137
Online Edition for Part no. 01405A02680 - II/20